Step 2: Network Setup
When the R3000 is fully booted, you can configure network settings. For this step, you
will need your network administrator to provide you the host name, gateway address,
and one unused IP address.
Access the R3000 Administrator Console
A. Launch Internet Explorer from the setup workstation.
B. Type in http://1.2.3.4:88 in the address field.
C. Click Go to open the R3000 Introductory Window:
NOTE: This window must be left open throughout your session.
The Introductory Window displays minimized when the login dialog box of the R3000
Administrator console application opens (see image on the next page).
8
6 M
C
Q
S
e
obile
lient
uiCk
tart
G
uide