Specify An Ip Range - 8e6 Technologies TAR User Manual

Specify an IP range

To add an IP address range:
1. Do one of the following:
2. Click Add IP Range to include that IP range in the
8 6 T ,
T
E ECHNOLOGIES HREAT
P
RELIMINARY
• To make a selection from Parent Ranges, click the row
in the Parent Ranges frame to highlight and select that
row, and also to add that Starting IP and Ending IP
range in the Starting IP and Ending IP fields at the left
of the tab. If necessary, edits can be made to these
fields.
• To add an IP address range without selecting from the
Parent Ranges frame:
a. Enter the Starting IP address.
b. Enter the Ending IP address.
• To calculate an IP address range:
a. Click the "Calculate IP Range" checkbox which
activates the IP Address and Netmask fields below.
b. Enter the IP Address.
c. Enter the Netmask which activates the Calculate
Range button.
d. Click Calculate Range to display the Starting IP
and Ending IP in the fields above.
Assigned Ranges list box:
U
A R
NALYSIS EPORTER SER
S S
ETUP ECTION
G
UIDE
C 1: U G
HAPTER SER ROUPS
S
ETUP
25