Create Factory Default Image; Figure B-10: Press F3 To Boot Into Recovery Mode; Figure B-11: Recovery Tool Menu - IEI Technology AFL2-W15A-N270 User Manual

AFL2-W15A-N270 Panel PC
B.2.5 Create Factory Default Image
NOTE:
Before creating the factory default image, please configure the system
to a factory default environment, including driver and application
installations.
To create a factory default image, please follow the steps below.
Turn on the system. When the following screen displays (
Step 1:
the <F3> key to access the recovery tool. The message will display for 10
seconds, please press F3 before the system boots into the operating system.

Figure B-10: Press F3 to Boot into Recovery Mode

The recovery tool menu appears. Type <4> and press <Enter>. (
Step 2:

Figure B-11: Recovery Tool Menu

The About Symantec Ghost window appears. Click OK button to continue.
Step 3:
F igure B-10), press
7 5
F igure B-11)
7 5
Page 97