Led Patterns - Brocade Communications Systems 300 Hardware Installation Manual

Interpreting LED activity
FIGURE 37 Detailed View, Brocade 300 LEDs
A. System status LED (green/amber)
B. System power LED (green)
C. Link status LED
D. Link speed LED
E. Port status LED for port 3
F. Port status LED for port 7

LED patterns

The following table summarizes the state of the Brocade 300 LEDs as well as recommended user responses.
TABLE 3 Brocade 300 LED Patterns During Normal Operation
LED Name
Power Status
System Status
62
LED Color
No light
Steady green
No light
Steady green
Steady amber (for more than five
seconds)
Status of Hardware
System is off or there is an internal
power supply failure.
System is on and power supplies
are functioning properly.
System is off, boot is not complete,
or boot failed.
System is on and power supplies
are functioning properly.
Boot failed, the system is faulty.
Recommended Action
Verify the system is on. If the
system is on, the unit is faulty.
Contact Technical Support.
No action required.
Verify the system is on and has
completed booting.
No action required.
Perform the following steps:
Connect a serial cable to the
system.
Reboot the system.
Check the failure indicated on the
system console.
Brocade 300 Hardware Installation Guide
53-1000862-12