Led Patterns - Brocade Communications Systems 6510 Hardware Installation Manual

FIGURE 6 LEDs on nonport side of Brocade 6510 with AC power supplies
1. Power supply/fan assembly #2 status LED
2. Power supply/fan assembly #1 status LED
FIGURE 7 LEDs on nonport side of Brocade 6510 with DC power supplies
1. Power supply/fan assembly #2 status LED
2. Power supply/fan assembly #1 status LED

LED patterns

TABLE 3
LED name
Power Status
(green)
System Status
(bicolor - amber/green)
Brocade 6510 Hardware Installation Guide
53-1002174-10
Port side LED patterns during normal operation
LED color
No light
Steady green
No light
Steady green
Steady amber
(for more than
five seconds)
Status of hardware
System is off or there is an
internal power supply failure.
System is on and power
supplies are functioning
properly.
System is off or there is no
power.
System is on and functioning
properly.
A system fault has occurred.
This LED displays steady
amber during POST, this is
normal and does not indicate a
fault.
LED patterns
Recommended action
Verify the system is powered on
(power supply switches to I), the
power cables attached, and your
power source is live.
The unit may be faulty.
Contact your switch service
provider.
No action required.
Verify the system is on and has
completed booting.
No action required.
Check the failure indicated on the
system console.
Contact your switch service
provider.
31