Led Patterns - Brocade Communications Systems VDX 6710 Hardware Reference Manual

LED patterns

Table 2
TABLE 2
LED name
System power
System status
Ethernet Link
(Management
and LOMM
[Remote
Lights Out]
port)
Ethernet
Activity
(Management
and LOMM
[Remote
Lights Out]
port)
Brocade VDX 6710 Hardware Reference Manual
53-1002xxx-01
DRAFT: BROCADE CONFIDENTIAL
describes the port side LEDs and their behaviors.
Port side LED patterns during normal operation
LED color
Off (no light)
Steady green
Off (no light)
Steady green
Steady amber (for
more than 5
seconds)
Off (no light)
Steady green
Off (no light)
Blinking green
Status of hardware
System is off or there is an
internal power supply failure.
System is on and power supplies
are functioning properly.
System is off or there is no
power.
System is on and functioning
properly.
A system fault has occurred
or
the switch is in an initialization
state.
There is no link.
Link is present.
There is no activity.
There is activity (traffic).
LED activity interpretation
Recommended action
Verify the system is powered on (power
supply switches to "l"), the power
cables are attached, and your power
source is live.
If the system power LED is not green,
the unit may be faulty.
Contact your switch service provider.
No action required.
Verify the system is on and has
completed booting.
No action required.
Check the management interface and
the error log for details on the cause of
the status.
Contact your switch service provider.
No action required.
No action required.
No action required.
No action required.
4
25