Figure 14 Wwn Bezel (Logo Plate) With Leds For Dcx And Dcx 8510-8; Figure 24 Wwn Bezel (Logo Plate) With Leds For Dcx And Dcx 8510-8; Table 10 Wwn Led Patterns For Dcx And Dcx 8510-8; Table 13 Wwn Led Patterns For Dcx And Dcx 8510-8 - Brocade Communications Systems DCX 8510-8 Hardware Reference Manual

The following figure displays the WWN bezel (logo plate). The WWN cards are under the bezel.
1
2
FIGURE 14
Table 10 describes the WWN card LED patterns and the recommended actions for those patterns.
Brocade DCX 8510-8 Backbone Hardware Reference Manual
53-1002180-03
TABLE 10 WWN LED patterns for DCX and DCX 8510-8
LED location/purpose
Port blade/CP/CR blade
power
Port blade/CP/CR blade
status
NOTE: If a blade slot has a filler panel installed, the corresponding LEDs on the WWN card do not light up.
NOTE: If a status LED on the WWN bezel flashes, the power LED on the WWN bezel also flashes, for increased
visibility.
CP blade Status (above) and Power (below) LEDs
CR blade Status (above) and Power (below) LEDs
WWN bezel (logo plate) with LEDs for DCX and DCX 8510-8
Determining the status of a WWN card
Color Status
Steady green Power is okay.
Steady amber Card is faulty.
No light (LED is off) Card is okay.
3 Port blade Status (above) and Power (below) LEDs
4 Slot numbers
4
Recommended action
No action required.
Check card.
No action required.
1
2
3
4
57