Port side of the Brocade 300
Port side of the Brocade 300
The port side of the Brocade 300 includes the system status LED, console port, Ethernet port and LEDs, USB port, and Fibre Channel
ports and the corresponding port status LEDs.
FIGURE 1 Port Side of the Brocade 300
1.
Switch ID pull-out tab
2.
System status (top) and power (bottom) LEDs
3.
System RS232 console port (RJ-45)
4.
Ethernet port with two Ethernet status LEDs
5.
USB port
6.
Fibre Channel port status LEDs
7.
Fibre Channel ports (24)
8.
AC power receptacle
FIGURE 2 Trunking port groups and port numbers of the Brocade 300
1.
Trunking port group 1: FC ports 00-07
2.
Trunking port group 2: FC ports 08-15
3.
Trunking port group 3: FC ports 16-23
NOTE
You can also use port index and PIDs to identify a port. For more information, refer to the Fabric OS Administrator's Guide.
Non-port side of the Brocade 300
The non-port side of the Brocade 300 is used solely for air flow. There are two labels on the bottom of the chassis. On the right side is
the Brocade standard agency label. On the left side is the Brocade standard OEM data label.
10
Brocade 300 Hardware Installation Guide
53-1000862-12