Led Patterns - Brocade Communications Systems 5300 Hardware Installation Manual

FIGURE 37 LEDs on non-port side of Brocade 5300
1. Power supply #2 status LED
2. Power supply #2
3. Fan assembly #3
4. Fan assembly #2
5. Fan assembly #1
6. Power supply #1 status LED
7. Power supply #1
8. Fan assembly #3 status LED
9. Fan assembly #2 status LED
10. Fan assembly #1 status LED

LED patterns

The following table describes the LEDs and their actions on the port side of the switch.
TABLE 2 Port side LED patterns during normal operation
LED name
Power Status
System Status
Brocade 5300 Hardware Installation Guide
53-1000858-07
LED color
No light
Steady green
No light
Steady green
Steady amber (for more than five
seconds)
Status of hardware
System is off or there is an internal
power supply failure.
System is on and power supplies
are functioning properly.
System is off or there is no power.
System is on and functioning
properly.
Unknown state, boot failed, or the
system is faulty.
LED activity interpretation
Recomended action
Verify the system is powered on
(power supply switches to "1"), the
power cables attached, and your
power source is live.
If the system power LED is not
green, the unit may be faulty.
Contact your switch service
provider.
No action required.
Verify the system is on and has
completed booting.
No action required.
Perform the following steps:
Connect a serial cable to the
system.
67