Led Patterns; Table 3 Port Side Led Patterns During Normal Operation; Figure 9 Leds On The Non-Port Side Of The Brocade Vdx 6730-76 - Brocade Communications Systems VDX 6730 Hardware Reference Manual

4
LED activity interpretation
1
2
3
FIGURE 9

LED patterns

Table 3
TABLE 3
LED name
System power
(one LED
[green])
System status
(one bicolor
LED [green
and amber])
Ethernet Link
(Management
and LOMM
[Remote
Lights Out]
port) (one LED
[green])
28
1
Power supply #2 status LED
Power supply #1 status LED
Fan assembly #3 status LED
LEDs on the non-port side of the Brocade VDX 6730-76
describes the port side LEDs and their behaviors.
Port side LED patterns during normal operation
LED color
Off (no light)
Steady green
Off (no light)
Steady green
Steady amber (for
more than 5
seconds)
Off (no light)
Steady green
3 4
4 Fan assembly #2 status LED
5 Fan assembly #1 status LED
Status of hardware
System is off or there is an
internal power supply failure.
System is on and power supplies
are functioning properly.
System is off or there is no
power.
System is on and functioning
properly.
A system fault has occurred
or the switch is in an
initialization state.
There is no link.
Link is present.
Brocade VDX 6730 Hardware Reference Manual
2
5
Recommended action
Verify the system is powered on (power
supply switches to "l"), the power
cables are attached, and your power
source is live.
If the system power LED is not green,
the unit may be faulty.
Contact your switch service provider.
No action required.
Verify the system is on and has
completed booting.
No action required.
Check the management interface and
the error log for details on the cause of
the status.
Contact your switch service provider.
No action required.
No action required.
53-1002389-06