Port-Side Led Patterns - Brocade Communications Systems VDX 6940 Series Hardware Installation Manual

FIGURE 39 LEDs on non-port side of Brocade VDX 6940-144S
1. Output power status
2. Input power status
NOTE
Although the pervious figure illustrates AC power supplies, DC power supplies have the same LED indicators.

Port-side LED patterns

LEDs for Ethernet management ports and GbE ports indicate port status and activity. LEDs for the system indicate power on/off and
system status.
The normal operation of port-side LEDs during normal operation (no faults) is as follows:
∙
The power LED is solid green when the system is powered on and turns black or off when system is powered off.
∙
The system status LED is steady amber for about 10 seconds after power is applied, and then transitions to a steady green. The
LED blinks amber until diagnostics are complete, and then turns steady green.
∙
The management port link activity LED blinks green for activity.
∙
The management port link status LED is steady green if link is present.
∙
The port LEDs blink green when there is traffic. The LEDs remain steady green when port is online.
The following table describes detailed port-side LED behavior and recommended user actions.
TABLE 10 Port-side LED patterns during operation
LED name
System power (one LED green)
76
LED color
Off (no light)
3. Fan status
Status of hardware
No power
Recommended action
Verify the system is powered on,
the power cables are attached, and
your power source is live.
Contact your service provider.
Brocade VDX 6940 Hardware Installation Guide
53-1003495-06
Operation