Brocade Communications Systems 300 Hardware Installation Manual page 60

Date and time settings
2. Enter the tsClockServer command:
switch:admin> tsclockserver
where ntp1 is the IP address or DNS name of the first NTP server, which the switch must be able to access. The second ntp2 is
the second NTP server and is optional. The operand "<ntp1;ntp2>" is optional; by default, this value is LOCL, which uses the
local clock of the principal or primary switch as the clock server.
switch:admin> tsclockserver
LOCL
switch:admin> tsclockserver "132.163.135.131"
switch:admin> tsclockserver
132.163.135.131
switch:admin>
The following example shows how to set up more than one NTP server using a DNS name:
switch:admin> tsclockserver
"10.32.170.1;10.32.170.2;ntp.localdomain.net"
Updating Clock Server configuration...done.
Updated with the NTP servers
Changes to the clock server value on the principal or primary FCS switch are propagated to all
switches in the fabric.
60
"<ntp1;ntp2>"
Brocade 300 Hardware Installation Guide
53-1000862-12