Reading The Tag Configuration Data - Siemens SIMATIC RF310M Operating Instructions Manual

SIMATIC RF310M software
6.5 The functions in the "Tag" menu
6.5.5

Reading the tag configuration data

You can execute reading of the configuration data of a tag using the menu command "Tag >
Read Config. Data" (or <ALT+T+C>), if you keep the tag at the minimum distance from the
read head of the Mobile Reader.
Byte address
0xFF1f
0xFF1e
0xFF1d
0xFF1c
0xFF1b
0xFF1a
0xFF19
0xFF18
0xFF17
0xFF16
0xFF15
0xFF14
36
EEPROM
Bank switch (bits 1 and 0)
MDS delay (bits 7:5); LFD (bit 4)
Reserved
Limit value A for LFD quotients
Limit value B for LFD quotients
Reserved
Memory configuration, INIT (bits
7...1)
Range for lock bits
Tag ID, byte 3
Tag ID, byte 2
Tag ID, byte 1
Tag ID, byte 0
Functional description
Memory bank
MDS delay/LFD bit
LFD (A)
LFD (B)
Memory configuration/Init bit
Lock bits
Tag ID (b24-b31)
Tag ID (b16-b23)
Tag ID (b8-b15)
Tag ID (b0-b7)
Operating Instructions, 07/2007, J31069-D0191-U001-A1-7618
SIMATIC RF310M Mobile Reader