Requirements For Operating The Tag Functions - Siemens SIMATIC RF310M Operating Instructions Manual

Simatic sensors rfid systems mobile reader
Hide thumbs Also See for SIMATIC RF310M:
Table of Contents

Advertisement

SIMATIC RF310M software
6.5 The functions in the "Tag" menu
6.5.2

Requirements for operating the tag functions

To enable execution of the tag functions, you must set the memory size of the tag and the
minimum distances between the Mobile Reader and the tag.
Setting the memory size of the tag (Tag Type Selection)
Set the memory size of the tag using "Extras" > "Tag Type Selection" ( or <Ctrl+S>). See
also Tag Type Selection (Page 46).
Distance limits to be observed between the Mobile Reader and the tag
The ranges listed in the table below are distance limits in the field maximum of the read
head.
Table 6-1
Ranges between Mobile Reader and transponders
Tag
Distance
limit (Sg)
Minimum
distance
for further
tags
Tag
Distance
limit (Sg)
Minimum
distance
for further
tags
32
RF320T
4 mm
12 mm
RF360T
22 mm
66 mm
RF340T
15 mm
45 mm
RF370T
22 mm
66 mm
Operating Instructions, 07/2007, J31069-D0191-U001-A1-7618
RF350T
20 mm
60 mm
RF380T
18 mm
54 mm
SIMATIC RF310M Mobile Reader

Advertisement

Table of Contents
loading

Table of Contents