Organization Of The File Read.hex - Siemens SIMATIC RF310M Operating Instructions Manual

Simatic sensors rfid systems mobile reader
Hide thumbs Also See for SIMATIC RF310M:
Table of Contents

Advertisement

Opening the PSION workstation/"Flash Disk" folder
Open the "Flash Disk" folder.
Figure 7-4
There you will find the file "READ_RF310.hex" and the files you have stored with the
extension ".hex". You can now drag and drop or copy these files from the drive of the PSION
Workabout Pro to the PC drive.
The file READ or WRITE has a length that corresponds to the size of the read MDS:
READ_RF310.hex:
Setup setting
20 bytes
2 KB
32 KB
64 KB
The contents of the file can now be displayed and modified using the relevant editor on the
PC:
● If ASCII data have been read from the tag:
● If binary data are exchanged with the tag:
7.2.3

Organization of the file READ.HEX

The file READ_x.HEX contains only the pure data that are also available on the tag. The
length of the file is identical with the memory size of the tag (in bytes).
SIMATIC RF310M Mobile Reader
Operating Instructions, 07/2007, J31069-D0191-U001-A1-7618
Flash disk folder
any editor can be used: NOTEPAD, WRITE, WORD, etc.
a HEX editor is used. HEX editors are available on the shareware market (e.g. Hedit,
etc.) or on the professional market (e.g. "Codewright").
7.2 Copying data from and to the Mobile Reader
File size in bytes
20
2045
32765
65280
Advanced functions
53

Advertisement

Table of Contents
loading

Table of Contents