Starting The Simatic Rf310M Software; The Data Editor - Siemens SIMATIC RF310M Operating Instructions Manual

SIMATIC RF310M software

6.2 Starting the SIMATIC RF310M software

6.2 Starting the SIMATIC RF310M software
If the SIMATIC RF310M software is not started when the device is switched on, it can be
started using the "RF310M" icon on the desktop or via "Desktop > My Computer >
Flash Disk > RF310M".
6.3

The data editor

The transponder data (MDS data) can be edited in the editor window in hex or ASCII format.
You can toggle between the two in the Editor/Display menu. (See Display (Page 41))
Figure 6-1
The entire size of a tag (MDS) memory is always represented in the editor. You can reach
the individual addresses using the input pen. A jump can be made to any address with the
menu point "Editor/Jump to Address". (see Jump to Address (Page 40)).
26
Data editor
Operating Instructions, 07/2007, J31069-D0191-U001-A1-7618
SIMATIC RF310M Mobile Reader