Working With The Active Sync Program - Siemens SIMATIC RF310M Operating Instructions Manual

Simatic sensors rfid systems mobile reader
Hide thumbs Also See for SIMATIC RF310M:
Table of Contents

Advertisement

7.2.2

Working with the Active Sync program

The ActiveSync program provides a connection via the USB to PSION Workabout Pro . You
can now copy data and programs very easily in the manner familiar from Explorer. You only
have to select the point "Mobile Device" in Explorer. It is also possible to reach the
Workabout PRO directly via ActiveSync .
Requirements for opening the PSION workstation
● The PSION Workabout Pro is connected in the docking station via the USB cable
● Active Sync. is installed
Opening the PSION workstation via Explorer and Mobile Device:
Select "Mobiles Gerät" or "Mobile Device" in Explorer:
Figure 7-1
Then select the "Flash Disk" folder.
SIMATIC RF310M Mobile Reader
Operating Instructions, 07/2007, J31069-D0191-U001-A1-7618
Opening the PSION workstation via Explorer
7.2 Copying data from and to the Mobile Reader
Advanced functions
51

Advertisement

Table of Contents
loading

Table of Contents