Nexxt Viking 150 User Manual page 85

Nexxt Solutions – Wireless-N 3G router
15.5 Backup & Restore
Go to System Tools Backup & Restore in the menu, in order to save the current configu-
ration of the router as a backup file and restore the original settings using a backup file as
shown in Figure 15-8.
Figure 15-8 Backup & Restore Configuration
•
Click the Backup button to save all the configuration settings to your local computer as a
file.
•
To upgrade the router's configuration, follow the instructions below.
•
Click the Browse... button to locate the update file for the router, or enter the exact path
to the Setting file in the text box.
•
Click the Restore button.
Note: The current configuration will be covered by the uploading configuration file. If the
process fails, it will render the device unmanageable. The restoring process lasts 20 seconds
and the device will restart automatically. Keep the power of the device on during the entire
process to avoid any potential damage to the unit.
15.6 Reboot
Go to System Tools Reboot, and press the Reboot button in order to reset the device, as
shown in the screen below.
Some settings of the router will only take effect after rebooting, which include:
•
LAN IP Address change (system will reboot automatically).
•
DHCP Settings change.
•
Wireless configuration change.
•
Web Management Port change.
•
Upgrade the firmware of the router (system will reboot automatically).
•
Restore the router's settings to factory defaults (system will reboot automatically).
•
Update the configuration with the file (system will reboot automatically).
Figure 15-9 Reboot the router
85