Nexxt Viking 150 User Manual page 21

Nexxt Solutions – Wireless-N 3G router
Step 4: Wait for a while until the next screen appears. Click Finish to complete the WPS
configuration.
Figure 3-9 WPS Configuration Screen for the Wireless Adapter
II. PIN configuration
If the wireless adapter supports Wi-Fi Protected Setup and the PIN Configuration, you can
add the device to the network by executing any of the two following methods.
First method: Enter the PIN into the router.
Step 1: Configure the wireless adapter. Please choose Enter a PIN into my access point or
a registrar in the configuration utility of the WPS as below, and click Next.
Figure 3 -10 WPS Configuration Screen of wireless adapter
Note: In this example, the default PIN code of this adapter is 16952898 as the above figure
shown.
21