Table of Contents
Advertisement
Nexxt Solutions – Wireless-N 3G router
•
Firmware version - The current firmware version is displayed here.
•
Hardware version – The current hardware version is displayed here. The hardware version
of the upgrade file must match the router's current hardware version.
15.5 Backup & Restore
1.
Download the latest firmware upgrade file from our website (http://www.nexxtsolutions.
com ).
2.
Type or select the path and file name of the update file into the File field. Or click the
Browse button to locate the update file.
3.
Click the Upgrade button.
Note:
1.
New firmware versions are posted at http://www.nexxtsolutions.com and can be down-
loaded for free. There is no need to upgrade the firmware unless the new firmware has a
new feature you want to use. However, when experiencing problems caused by the router
rather than the configuration, you can try to upgrade the firmware.
2.
When you upgrade the router's firmware, you may lose its current configuration. There-
fore, before upgrading the firmware, please write down your customized parameters to
avoid losing important settings.
3.
Do not turn off power or press the reset button while the firmware is being upgraded; do-
ing so might cause serious damage to the router.
4.
The router will reboot after the upgrading has been finished.
15.4 Factory Defaults
Go to System Tools
Factory Defaults in the menu, in order to restore the router configu-
ration to its factory default values, as seen on the following screen
Click the Restore button to reset all settings to their factory default values.
•
Default User Name: admin
•
Default Password: admin
Default IP Address: 192.168.0.1
•
•
Default Subnet Mask: 255.255.255.0
Note: Any settings you have saved will be lost after the default settings are restored.
Figure 15-4 Diagnostic Tools
84
Hide quick links:
Advertisement
Table of Contents
