Nexxt Viking 150 User Manual page 75

Nexxt Solutions – Wireless-N 3G router
•
MAC Address - The MAC address of the monitored computer in the LAN.
•
IP Address - The assigned IP address of the monitored computer in the LAN.
•
Bind - Check this option to enable ARP binding for a specific device.
•
Modify – Use this link to edit or delete an existing entry.
When you want to add or edit an IP & MAC Binding entry, click the Add New button or
Modify button, and then you will be directed to the next page. This page is used for adding or
modifying an IP & MAC Binding entry (shown in Figure 13-3).
Figure 13-3 IP & MAC Binding Setting (Add & Modify)
To add IP & MAC Binding entries, follow the steps below.
Click the Add New button, as shown in figure 13-2.
1.
2. Enter the MAC Address and IP Address.
3. Select the Bind checkbox.
Click the Save button to accept your changes.
4.
Figure 13-2 Binding setting
75