Nexxt Viking 150 User Manual page 37

Nexxt Solutions – Wireless-N 3G router
Some ISPs require that you register the MAC Address of your adapter. Changes are rarely
needed here.
• WAN MAC Address - This field displays the current MAC address of the WAN port. If your
ISP requires that you to register the MAC address, please enter the correct MAC address
into this field in XX-XX-XX-XX-XX-XX forma t (X is any hexadecimal digit).
Your PC's MAC Address - This field displays the MAC address of the PC that is managing
•
the router. If the MAC address is required, you can click the Clone MAC Address To button
and this MAC address will be copied into the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Click the Save button to store your settings.
Note: Only the PC on your LAN can use the MAC Address clone function.
5. LAN
Go to Network LAN in the menu, in order to configure the IP parameters of the LAN on
the screen, as shown below.
Figure 4 -1 MAC Address clone
Figure 5-1 LAN
37