Nexxt Viking 150 User Manual page 35

Nexxt Solutions – Wireless-N 3G router
User Name/Password - Type the User Name and Password provided by your ISP . These
•
fields are case-sensitive.
• Dynamic IP/ Static IP – Select the one as provided by your ISP . Click the Connect button to
connect immediately. Click the Disconnect button to disconnect immediately.
• Connect on demand - You can configure the router to cancel your Internet connection after
a specified period of inactivity (Max Idle Time). If your Internet connection has been termi-
nated due to inactivity, Connect on demand enables the router to automatically re-establish
your connection as soon as you attempt to access the Internet again. If you wish to activate
Connect on demand, click the radio button. If you want your Internet connection to remain
active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of min-
utes you want to have elapsed before your Internet connection is terminated.
Connect automatically - Connects automatically after the router is disconnected. To use
•
this option, click the radio button.
Connect manually - You can set up the router so as to connect or disconnect it manually.
•
After a specified period of inactivity (Max Idle Time), the router will cancel your Internet con-
nection, in which case you will not be able to re-establish your connection automatically as
soon as you attempt to access the Internet again. To use this option, click the radio button.
If you want your Internet connection to remain active at all times, enter "0" in the Max Idle
Time field. Otherwise, enter the number of minutes that you wish to keep the connected
status active, unless a new link is requested.
Caution: Sometimes the connection cannot be terminated despite your setting of the "Max
Idle Time" interval. This is due to some applications are continually linked to the internet in the
background.
6. If your ISP provides a PPTP connection, please select the PPTP option. Then proceed to fill
in the corresponding parameters (Figure 3-28):
Figure 3-28 PPTP Settings
35