Nexxt Viking 150 User Manual page 31

Nexxt Solutions – Wireless-N 3G router
• User Name/Password - Enter the User Name and Password provided by your ISP . These
fields are case-sensitive.
• Secondary connection – It is available only for PPPoE Connection. If your ISP provides an
additional Connection method such as Dynamic/Static IP to gain access to a local area
network, then you can check the radio button of Dynamic/Static IP to activate this
secondary connection.
• Disabled - The Secondary Connection is disabled by default, so there is only the PPPoE
connection available, this being the recommended setting for this feature.
Dynamic IP - You can check this radio button to use Dynamic IP as the secondary
•
connection to gain access to the local area network provided by ISP .
• Static IP - You can check this radio button to use Static IP as the secondary connection
to gain access to the local area network provided by ISP .
• Connect on demand - In this mode, the Internet connection can be terminated automati-
cally after a specified period of inactivity (Max Idle Time) and be re-established when you
attempt to access the Internet again. If you want to keep your Internet connection active all
the time, please enter "0" in the Max Idle Time field. Otherwise, enter the number of min-
utes you want to have elapsed before your Internet access disconnects.
Figure 3-24 WAN - PPPoE
31