Nexxt Viking 150 User Manual page 67

Nexxt Solutions – Wireless-N 3G router
10.2 Target
Go to menu Access Control
the screen below (figure 10-8). The target list is necessary for the Access Control Rule.
• Target Description - The target name, which is unique, is displayed in this field.
Information - The target can be an IP address, port, or domain name.
•
• Modify – Use this link to edit or delete an existing entry.
To add a new entry, please follow the steps below.
1. Click the Add New button.
2. In the Mode field, select IP Address or Domain Name.
• If you select IP Address, the screen shown in figure 10.9 will be displayed
In the Target Description field, create a unique description for the target
1.
(e.g. Target_1).
2. In the IP Address field, enter the corresponding address for the target.
3. Select a common service from the Common Service Port from the drop-down list, so
that the Target Port will be automatically filled out. If the Common Service Port drop-
down list does not have the service you want, specify the Target Port manually.
4. In the Protocol field, select TCP , UDP , ICMP or ALL.
• If you select Domain name, the screen shown in figure 10-10 will be displayed.
1. In the Target description field, create a unique name for the target (e.g. Target_1).
Enter the domain name, either the full name or the keywords (for example google) in
2.
the Domain name blank field. Any domain name with keywords in it (www.google.com,
www.google.cn) will be blocked or allowed. You can enter up to 4 domain names.
Click the Save button.
3.
Click the Delete all button to erase all the entries in the table.
Click the Next button to go to the following page, or click the Previous button return to the
last page.
Target, in order to visualize and set a Target list, as shown in
Figure 10-8 Target settings
67