Nexxt Viking 150 User Manual page 39

Nexxt Solutions – Wireless-N 3G router
SSID - Enter a value of up to 32 characters. The same name of SSID (Service Set Identifi-
•
cation) must be assigned to all wireless devices in your network. Considering your wireless
network security, the default SSID is set to be NEXXT_XXXXXX (in which xxxxxx represents
the last six unique characters of each router's MAC address). This value is case-sensitive.
For example, TEST is NOT the same as test.
Region - Select your region from the pull-down list. This field specifies the region where the
•
wireless function of the router can be used. It may be illegal to use the wireless function of
the router in a region different from those specified in this field. If your country or region is
not listed, please contact your local government agency for assistance.
Note: Based on local regulations, the North America version does not have the region selec-
tion option available.
• Channel - This field determines which operating frequency will be used. The default channel
is set to Auto, so the AP will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
Mode - Select the desired mode. The default setting is 11bgn mixed.
•
11b only – Select it when all of your wireless clients are 802.11b.
11g only – Select it when all of your wireless clients are 802.11g.
11n only – Select it when all of your wireless clients are 802.11n.
11bg mixed – Select it when you are using both 802.11b and 802.11g wireless clients.
11bgn mixed – Select it when you are using a mix of 802.11b, 11g, and 11n wireless
clients.
Figure 6-2 Wireless settings
39