Table of Contents
Advertisement
Nexxt Solutions – Wireless-N 3G router
WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).It
•
indicates the index of the WEP key.
•
Auth Type - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It indi-
cates the authorization type of the Root AP .
•
Password - If the AP your router is going to connect needs password, you need to fill the
password in this blank.
6.2 Wireless security
Go to Wireless
Wireless security in the menu, in order to configure the security settings
of your wireless network.
There are five wireless encryption methods supported by the router: WEP (Wired Equivalent
Privacy), WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA2-PSK
(Pre-Shared Key), WPA-PSK (Pre-Shared Key).
Disable security - If you do not want secure your network, check this box. However, it is
strongly recommended to opt for one of the following encryption methods, to better protect
your network traffic.
WPA/WPA2 – Personal (Recommended) - It's the WPA/WPA2 authentication type based on
pre-shared passphrase.
Version - you can choose the version of the WPA-PSK security on the drop-down list. The de-
fault setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or WPA2-PSK
(Pre-shared key of WPA) automatically based on the wireless station's capability and request.
Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select either
Automatic, or TKIP or AES as Encryption.
Note: If you check the WPA/WPA2 – Personal (Recommended) radio button and choose
TKIP encryption, you will find a notice in red as shown in Figure 6-5.
Figure 6-4
41
Hide quick links:
Advertisement
Table of Contents
