Table of Contents
Advertisement
Nexxt Solutions – Wireless-N 3G router
•
Location / Mobile ISP – These two fields will display the location and the ISP you have
selected in the previous page (shown in Figure 4-7). While you tick the below option Set the
Dial Number and APN manually, there will be no specific information in these two fields.
Set the Dial Number and APN manually - Tick the checkbox and then you are able to fill in
•
the Dial Number and APN blanks below, if your ISP is not listed in the Mobile ISP field in the
previous page (Figure 4-7).
Dial Number - Enter the Dial Number provided by your ISP .
•
•
APN - Enter the APN (Access Point Name) provided by your ISP .
•
Username/Password - Enter the User Name and Password provided by your ISP . These
fields are case-sensitive.
•
MTU Size - The default MTU (Maximum Transmission Unit) size is 1480 bytes, which is
usually fine. For some ISPs, you need modify the MTU. This should not be done unless you
are sure it is necessary for your ISP .
•
Use the following DNS Servers - If your ISP specifies a DNS server IP address for you,
click the checkbox, and fill the Primary DNS and Secondary DNS blanks below. The Second-
ary DNS is optional. Otherwise, the DNS servers will be assigned dynamically from ISP .
•
Primary DNS - (Optional) Enter the DNS IP address in dotted-decimal notation provided by
your ISP .
•
Secondary DNS - (Optional) Enter another DNS IP address in dotted-decimal notation pro-
vided by your ISP .
Click the Save button to save your settings.
Click the Back button to return the previous page.
Click the Modem settings button (in Figure 3-20) if your 3G USB Modem is not supported
by the Router, and then you will see the screen as shown in Figure 3-21. Parameters of your
USB modem can be configured on this page.
Figure 3-19
3G Advanced settings
27
Hide quick links:
Advertisement
Table of Contents
