Nexxt Viking 150 User Manual page 22

Nexxt Solutions – Wireless-N 3G router
Step 2: Configure the router. Keep the default WPS Status as Enabled and click the Add
device button in Figure 3-11, then the following screen will appear.
Step 3: Choose Enter the new device's PIN and enter the PIN code of the wireless adapter
in the field behind PIN in the previous figure. Then click Connect.
Note: The PIN code of the wireless adapter is always displayed on the WPS or WPS configu-
ration screen.
Method Two: Enter the PIN from my router
Step 1: Get the current PIN code of the router in Figure 3-12 (each router has its unique PIN
code. Take the PIN code 12345670 of this router, for example).
Step 2: For the configuration of the wireless adapter, please choose Enter a PIN from my
access point in the configuration utility of the WPS as below, and enter the PIN code of the
Router into the field Access Point PIN. Then click Next.
Figure 3-11
Figure 3-12
22