Table of Contents
Advertisement
Nexxt Solutions – Wireless-N 3G router
•
Detect online interval - Access Concentrator online detection that the router will run at
the specified interval. The default value is "0". You can select any number between "0" and
"120". A "0" setting means no detection.
•
DNS IP address - If your ISP does not automatically assign DNS addresses to the router
during login, please click Use the following DNS servers check box and enter the IP address
in dotted-decimal notation of your ISP's primary DNS server. If a secondary DNS server ad-
dress is available, enter it as well.
Click the Save button to store your settings.
If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond
4.
Cable. Proceed to fill in the following parameters, as shown below (Figure 3-26):
•
User Name/Password - Enter the User Name and Password provided by your ISP . These
fields are case-sensitive.
•
Auth server - Enter the authenticating server IP address or host name.
Auth domain - Type in the domain suffix server name based on your location.
•
e.g.
NSW / ACT - nsw.bigpond.net.au
VIC / TAS / WA / SA / NT - vic.bigpond.net.au
QLD - qld.bigpond.net.au
Figure 3-26 WAN –BogPond cable
33
Hide quick links:
Advertisement
Table of Contents
