Nexxt Viking 150 User Manual page 25

Nexxt Solutions – Wireless-N 3G router
4.6.2 3G
Go to Network→ 3G in the menu to configure the parameters of the 3G mode on the
screen, as shown below. To use the 3G mode, you should first insert your USB modem on the
USB port of the router. The USB modem parameters will be set automatically if the card is
supported by the router. Take MA180 for example. If the USB modem that you have inserted
is supported by the router, click Advanced Settings.
Note (Viking 150 only): 3G settings are unavailable when the Internet Access mode is set to
WAN Only. If you want to use the 3G mode, you will have to change the settings explained on
4.6.1 Internet Access.
Figure 3-17
Figure 3-18 3G
25