Table of Contents
Advertisement
Nexxt Solutions – Wireless-N 3G router
Figure 10-1 Access control rule management
•
Enable Internet Access Control - Check this box to enable the Internet Access Control
feature, so that the Default Filter Policy can take effect.
•
Rule Name- The name of the rule is displayed here, which is unique.
Host - The host selected with the corresponding rule is displayed in this field.
•
•
Target - The target selected with the corresponding rule is displayed in this field.
•
Schedule - The schedule selected with the corresponding rule is displayed in this field.
Action - The action taken by the router to deal with the packets is displayed here. It could
•
be Allow or Deny. Allow means that the router permits the packets to pass through. Deny
means that the router is configured to reject the packets.
•
Status - This field displays the current status of the rule. Enabled means the rule will be
applied. Disabled means the rule will not take effect.
Modify – Use this link to edit or delete an existing rule.
•
To add a new rule, please follow the steps below.
1.
Click the Add New button. The screen shown in figure 10-2 below will appear.
Assign a name (e.g. Rule_1) to the rule in the Rule Name field.
2.
3.
Select a host from the Host drop-down list, or choose Click here to add a new host list.
4.
Select a target from the Target drop-down list, or choose Click here to add new target list.
Select a schedule from the Schedule drop-down list, or choose Click here to add new
5.
schedule.
6.
In the Action field, select Deny or Allow.
In the Status field, select the Enabled or Disabled condition for that entry.
7.
8.
Click the Save button.
63
Hide quick links:
Advertisement
Table of Contents
