Maintenance - Beckhoff C5101 Installation And Operating Instructions Manual

Operating Instructions
Danger
Danger
Front view showing the filter
drawer
Access to the filter mat
14

Maintenance

Please also refer to chapter
Cleaning the Industrial PC
Switch off the Industrial PC and all connected devices, and disconnect the
Industrial PC from the power supply.
The Industrial PC can be cleaned with a soft, damp cloth. Do not use any
aggressive cleaning materials, thinners, scouring material or hard objects
that could cause scratches.
Replacing the battery on the motherboard
A used battery on the motherboard has to be replaced according to the
rules of the board manufactorer.
Danger of Explosion if battery is incorrectly replaced. Replace only with
same or equivalent type recommended by the manufacturer. Dispose of
used batteries according to the manufacturer's instructions.
Servicing
The Industrial PC requires no maintenance if it is used in an environment
where dust levels are low.
If the Industrial PC is used in an environment where the air is particularly
dirty, the fan's filter mat should be examined at regular intervals to see how
dirty it is, and should be exchanged, if necessary, for an original Beckhoff
filter mat (item number C9900-Z213, filter mat for C510x, 10 per pack).
Please also refer to chapter
Changing the filter mat
3
Access to the filter mat is obtained behind the front flap. This must be
opened with its key. The filter drawer (1) can then be pulled out towards
the right using the retention tongue (2).
After the mat (3) has been changed the filter is refitted in the reverse
sequence.
General Notes.
Changing the filter mat.
1
2
C5101