Table of Contents
Advertisement
Opening the housing
Removing the card holder
View of the open PC
C5101
In order to open the PC housing, remove the 4 fastening screws at the side
of the housing cover (see photo Rear view of the C5101) using a cross-
head screwdriver. The cover of the housing can then be lifted up, providing
access to the hard drive, processor, memory and plug-in cards (see
following photograph).
Remove the 2 fastening screws of the card holder (see arrows) using a
cross-head screwdriver. The holder can then be lifted up.
1
2
A plug-in motherboard (1) and a 14-slot passive backplane (2) are located
under the housing cover.
The power supply unit (3), the hard drive and the CD/ DVD-drives (4) are
easily accessible.
The connections to the outside are located at the rear of the housing (5)
and behind the front flap.
Product Description
5
3
4
7
Advertisement
Table of Contents
