Interfaces - Beckhoff C5101 Installation And Operating Instructions Manual

Interfaces to the C5101
Industrial PC
RS 232
COM1 - COM2
Network 100/1000BASE-T
Network 10/100BASE-T
DVI-I
USB1 – USB3
Type plate
8

Interfaces

3
1
4
5
2
6
Serial interfaces
The basic version of the C5101 Industrial PC has two serial interfaces,
COM1 (1) and COM2 (2), using the type RS232, which are brought to a 9
pin SUB-D plug connector.
Network connection
The RJ-45 connector (3) allows the PC to be connected to a
100/1000BASE-T Local Area Network (LAN).
The RJ-45 connector (4) allows the PC to be connected to a
10/100BASE-T Local Area Network (LAN).
DVI (Digital Visual Interface)
The DVI connection (5) is used for transferring the video signal.
DVI-I standard is supported.
USB interfaces
The USB interfaces (6) (7) and (8) are used to connect peripheral devices
with USB connections.
Two more USB interfaces are located behind the front flap.
USB2.0 standard is supported.
Additional plug-in cards (optional)
There is a type plate on the top of the Industrial PC which provides
information about the hardware configuration of the Industrial PC at the
time it was supplied.
7
8
9
C5101