User Tools Menu (Copier / Document Server Features) - Ricoh C4540 Operating Instructions Manual

User Tools Menu (Copier / Document
Server Features)
This section describes items that can be specified on the Copier / Document
Server Features screen. The Copier / Document Server Features screen can be
displayed by pressing the {User Tools/Counter} key. For details about how to set
up these items, see General Settings Guide.
❖ General Features
Item
Auto Image Density Prior-
ity
Original Type Priority
Original Photo Type Prior-
ity
Original Type Display
Paper Display
Original Orientation in
Duplex Mode
Copy Orientation in Du-
plex Mode
Max. Copy Quantity
Auto Tray Switching
Tone: Original Remains
Job End Call
Customize Function: Copi-
er
Customize Function: Doc-
ument Server Storage
❖ Reproduction Ratio
Item
Shortcut R / E
Description
Select whether Auto Image Density is automatically applied after
power on, when modes are cleared or reset, or a color selection
key is pressed.
Specify the original type that is automatically selected after power
on, when modes are cleared or reset, or when a color selection key
is pressed.
When you select "Text / Photo" or "Photo" in "Original Type Pri-
ority", you can change the settings of the selected original type.
You can have the original types shown on the initial display.
You can choose to have the available paper trays and sizes shown
on the initial display.
You can set the original orientation when making two-sided cop-
ies.
You can set the copy orientation when making two-sided copies.
You can set the maximum copy quantity.
If you load paper of the same size in two or more trays, the ma-
chine automatically shifts to the other when the first tray runs out
of paper (when Auto Paper Select is selected.) This function is
called "Auto Tray Switching". This setting specifies whether to
use Auto Tray Switching or not.
The beeper (key tone) sounds if you forget to remove originals af-
ter copying.
You can choose to have the beeper sound when copying is com-
plete.
Register up to six frequently used functions and display them on
the initial screen. (Registered functions can be changed.)
Register up to six frequently used functions and display them on
the initial screen. (Registered functions can be changed.)
Description
You can register up to three frequently used Reduce/Enlarge ra-
tios other than the fixed Reduce/Enlarge ratio and have them
shown on the initial display. You can also change registered Re-
duce/ Enlarge ratios.
7
Draft 2006/03/07