User Tools Menu (Copier/Document Server Features) - Ricoh Savin en5100WD Operating Instructions Manual

User Tools Menu (Copier/Document Server
Features)
This section describes items that can be specified on the Copier/Document Server Features screen. The
Copier/Document Server Features screen can be displayed by pressing the [User Tools/Counter] key.
For details about how to set up these items, see General Settings Guide.
General Features
Item
Auto Image Density
Priority
Original Photo Type
Priority
Max. Copy Quantity
Auto Tray Switching
Job End Call
Reproduction Ratio
Item
User Reduce/Enlarge
Ratio
Reproduction Ratio
Reduce / Enlarge Ratio
Priority
You can set whether Auto Image Density is "On" or "Off" when the
machine is turned on, reset, or modes are cleared.
When you select "Text / Photo" or "Photo" in "Original Type
Priority", you can change the settings of the selected original type.
The maximum copy quantity can be set between 1 and 99.
If you load paper of the same size in two or more trays, the machine
automatically shifts to the other when the first tray runs out of paper
(when Auto Paper Select is selected.) This function is called "Auto
Tray Switching". This setting specifies whether to use Auto Tray
Switching or not.
Choose whether or not the beeper sounds when copying is
complete.
You can register up to three frequently used Reduce/Enlarge ratios
other than the fixed Reduce/Enlarge ratio and have them shown on
the initial display. You can also change registered Reduce/Enlarge
ratios.
Specify the enlargement and reduction ratios that appear if
[Reduce / Enlarge] is pressed on the copier screen.
You can set the ratio that has priority when [Reduce / Enlarge] is
pressed.

User Tools Menu (Copier/Document Server Features)

Description
Description
187