Ricoh C4540 Operating Instructions Manual page 135

F
Press [mProgram], and then press the stamp number you want to program.
G
Enter the user stamp name (up to ten characters) with the letter keys, and
then press [OK].
H
Enter the horizontal size of the stamp with the number keys, and then press
the {q} key.
I
Enter the vertical size of the stamp with the number keys, and then press
the {q} key.
J
Place the original for user stamp on the exposure glass, and then press [Start
Scanning].
The original will be scanned, and the stamp will be registered.
K
Press [Exit].
L
Press [Exit].
The display returns to the User Tools/Counter/Inquiry screen.
M
Press [Exit].
Exits settings and gets ready to copy.
Note
❒ Stamp numbers with m already have settings in them.
❒ If the stamp number is already being used, the machine will ask you if you
want to overwrite it . Press [Yes] or [Stop].
❒ Originals cannot be scanned from the ADF when programming the user
stamp.
To delete the user stamp
Deletes an image registered as a user stamp.
You cannot restore a deleted stamp.
A
Press the {User Tools/Counter} key.
AQI036S
Copier Functions
111
Draft 2006/03/07
2