When Copying Onto Thick Paper - Ricoh C4540 Operating Instructions Manual

Copying
❒ OHP transparencies must be loaded face-down in the tray with the notched
corner of the sheet in the appropriate corner of the tray.
❒ To prevent multiple sheets from being fed at once, fan paper before placing it
on the tray.
❒ When copying onto OHP transparencies, remove copied sheets one by one.
A
Open the bypass tray, and then insert the paper face-down until you hear
the beep.
2
B
Align the paper guide to the paper size by pinching the clip.
C
Press [Bypass], and then press the {q} key.
D
Select paper type ([OHP (Transparency)] or [Thin Paper]) in the special paper
settings.
E
Set the paper size, and then press [OK] to return to the initial display.
F
Place the original, and then press the {Start} key.
G
When the copy job is finished, press the {Clear Modes} key to clear the set-
tings.
Note
❒ For OHP transparencies or thin paper, print speed is slower when com-
pared to printing on plain paper.

When Copying onto Thick Paper

When copying onto thick paper, select the type and size of paper.
To prevent multiple sheets from being fed at once, fan paper before placing it on
the tray.
A
Open the bypass tray, and then insert the paper face-down until you hear
the beep.
B
Align the paper guide to the paper size by pinching the clip.
C
Press [Bypass], and then press the {q} key.
38
Draft 2006/03/07