Ricoh C4540 Operating Instructions Manual page 32

Item
R / E Ratio
R / E Ratio Priority
Ratio for Create Margin
❖ Edit
Item
Front Margin: Left / Right You can specify left and right margins on the front side of copies
Back Margin: Left / Right
Front Margin: Top / Bot-
tom
Back Margin: Top / Bot-
tom
1 Sided 2 Sided Auto
Margin: TtoT
1 Sided 2 Sided Auto
Margin: TtoB
Erase Border Width
Erase Original Shadow in
Combine
Erase Center Width
Front Cover Copy in Com-
bine
Copy Order in Combine
Orientation: Booklet, Mag-
azine
Copy on Designating Page
in Combine
Image Repeat Separation
Line
Double Copies Separation
Line
Separation Line in Com-
bine
❖ Stamp
8
Description
Specify the enlargement and reduction ratios that appear on the
copier screen when you press [Reduce / Enlarge].
Specify the enlargement and reduction ratios that are prioritized
when you press [Reduce / Enlarge].
You can set a Reduce/Enlarge ratio when registering Create Mar-
gin in a shortcut key.
Description
using the Margin Adjustment function.
You can specify left and right margins on the back side of copies
using the Margin Adjustment function.
You can specify top and bottom margins on the front side of cop-
ies using the Margin Adjustment function.
You can specify top and bottom margins on the back side of copies
using the Margin Adjustment function.
When using the 1 sided
ify margins on the back side.
When using the 1 sided
ify margins on the back side.
You can specify the width of erased border margins using this
function.
In Combine Copy or Booklet/Magazine Copy mode, you can
specify whether to erase a 3 mm, 0.1" bounding margin around all
four edges of each original.
You can specify the width of the erased center margins using this
function.
You can make a combined copy on the front cover sheet when you
select the Front Cover function.
You can set the copy order when using the Combine function to
Left to Right or Top to Bottom.
You can select the orientation of copies to open when using Book-
let or Magazine function.
You can make a combined copy on the inserted slip sheets when
using the Desig./Chapter Copy function.
You can select a separation line used in the Image Repeat function
from: None, Solid, Broken A, Broken B, or Crop Marks.
You can select a separation line used in the Double Copies func-
tion from: None, Solid, Broken A, Broken B, or Crop Marks.
You can select a separation line used in the Combine function
from: None, Solid, Broken A, Broken B, or Crop Marks.
2 sided Duplex function, you can spec-
2 sided Duplex function, you can spec-
Draft 2006/03/07