Ricoh C4540 Operating Instructions Manual page 59

A
Open the bypass tray.
B
Insert the paper face-down until you hear the beep, and then align the pa-
per guide to the paper size by pinching the clip.
If the guides are not flush against the copy paper, images might be skewed or
paper misfeeds might occur.
Do not stack paper over the limit mark, otherwise images might be skewed or
paper misfeeds might occur.
Swing out the extender to support paper sizes larger than A4L or 8
11"L.
Fan paper to get air between the sheets and avoid a multi-sheet feed.
A
Extender
B
Paper guide
C
Press [Bypass], and then press the {q} key.
D
Select the size and type of the paper.
E
Press [OK].
F
Place the original, and then press the {Start} key.
G
When the copy job is finished, press the {Clear Modes} key to clear the set-
tings.
Note
❒ When the Sort function is selected, press the {q} key after all originals
have been scanned.
AQF070S
AQF071S
Copying from the Bypass Tray
1
/ "
2
Draft 2006/03/07
2
35