Punch - Ricoh C4540 Operating Instructions Manual

Note
❒ When placing an original on the exposure glass, start with the first page to
be copied. When placing an original in the ADF, set so that the last page is
on the bottom.
❒ When placing an original on the exposure glass or in the ADF using Batch
mode, press the {q} key after all the originals have been scanned.
Reference
See "Select Stapling Position", General Settings Guide.

Punch

You can make punch holes in copies.
❖ 2 holes
❖ 3 holes
Important
❒ Booklet Finisher SR3020 or Finisher SR3030 is required.
❒ You cannot use the bypass tray with this function.
GCPNCH1E
GCPNCH3E
Copier Functions
79
Draft 2006/03/07
2