Cisco ASR 9000 Series Software Manual page 69

Implementing Layer-3 Multicast Routing on Cisco IOS XR Software
Command or Action
Step 3
rp-address ip-address [group-access-list-name]
[bidir] [override]
Example:
RP/0/RSP0/CPU0:router(config-pim-vrf_A-ipv4)#
rp-address 10.0.0.0
Step 4
commit
Specifying the IGMP VRF Instance
SUMMARY STEPS
1. configure
2. router igmp
3. vrf vrf-name
4. commit
DETAILED STEPS
Command or Action
Step 1 configure
Step 2 router igmp
Example:
RP/0/RSP0/CPU0:router(config)# router igmp
Step 3 vrf vrf-name
Example:
RP/0/RSP0/CPU0:router(config-igmp)# vrf vrf_B
Step 4
commit
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
Purpose
Configures the PIM rendezvous point (RP) address:
• group-access-list-name = Specifies an access list of
groups to be mapped to a given RP.
• bidir = Specifies a bidirectional RP.
• override = Specifies that a static RP configuration should
override auto-RP and the bootstrap router (BSR).
Purpose
Enters IGMP configuration mode.
Configures a VRF instance.
Configuring Multicast VPN
69