Cisco ASR 9000 Series Software Manual page 2

Release
Release 4.0.0
Release 4.0.1
Release 4.1.0
Release 4.2.1
Release 4.3.2
Release 5.2.0
Release 6.1.2
Release 6.1.2
Release 6.1.2
• Prerequisites for Implementing Multicast Routing, page 3
• Information About Implementing Multicast Routing, page 3
• How to Implement Multicast Routing, page 50
• Multicast only fast reroute (MoFRR), page 92
• Enabling multicast on PW-HE interfaces, page 99
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
2
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software
Modification
Support was added for IPv4 Multicast routing, Multicast VPN
basic and InterAS option A on Cisco ASR 9000 Series SPA
Interface Processor-700 linecard and MVPN Hub and Spoke
Topology.
Support was added for IPv6 Multicast routing.
Support was added for Label Switched Multicast using
Point-to-Multipoint Traffic Engineering in global context only
(not in VRF).
Support was added for these features:
• Label Switched Multicast using MLDP (Multicast Label
Distribution Protocol).
• Multicast VPN for IPv6 address family.
• Support for Satellite nV.
• InterAS Support on Multicast VPN.
Support was added for these features:
• Support for IPv4 traffic on Multicast over unicast GRE was
introduced.
• Support was added for TI (Topology Independent) MoFRR.
Support was introduced for Bidirectional Global Protocol
Independent Multicast.
Layer 3 Multicast Bundle Subinterface Load Balancing feature
was introduced.
Segmented Multicast Stitching with Inter AS and MLDP Carrier
Supporting Carrier based MVPN feature support was extended
to support Cisco IOS XR 64 bit.
MVPN, MoGRE, MoFRR and Global Table Multicast feature
support was extended to support Cisco IOS XR 64 bit.