Cisco ASR 9000 Series Software Manual page 34

Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support
• RPL-Extranet, Hub & Spoke supported.
• Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
• Inter-AS Option A and C- supported.
Profile 22 : Rosen-P2MP-TE with BGP C-multicast Routing
These are the characteristics of this profile:
• Dynamic P2MP-TE tunnels with BGP C-multicast Routing
• All UMH options supported.
• Default and Data MDT supported.
• Customer traffic can be SM or SSM .
• RIB-Tail-end-Extranet, RPL-Tail-end-Extranet supported.
• Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
• Inter-AS Option A and C- supported.
• All PEs must have a unique BGP Route Distinguisher (RD) value. To configure BGP RD value, refer
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide .
Profile 24: Partitioned-P2MP-TE with BGP AD/PIM C-multicast Routing
These are the characteristics of this profile:
• Dynamic P2MP-TE tunnels setup on demand, with PIM C-multicast Routing
• All UMH options supported.
• Default and Data MDT supported.
• Customer traffic can be SM or SSM .
• RPL-Extranet, Hub & Spoke supported.
• Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
• Inter-AS Option A and C- supported.
Profile 26 : Partitioned-P2MP-TE with BGP C-multicast Routing
These are the characteristics of this profile:
• Dynamic P2MP-TE tunnels with BGP C-multicast Routing
• All UMH options supported.
• Default and Data MDT supported.
• Customer traffic can be SM, SSM.
• RIB-Tail-end-Extranet, RPL-Tail-end-Extranet supported.
• Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
• Inter-AS Option A and C- supported.
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
34
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software