Cisco ASR 9000 Series Software Manual page 160

Configuring LSM based MLDP: Examples
address-family ipv4 unicast
redistribute connected
!
!
mpls traffic-eng
interface GigabitEthernet0/0/2/0
!
!
mpls ldp
router-id 1.1.1.1
graceful-restart
mldp
logging internal
!
<all core-facing interfaces>
!
!
multicast-routing
address-family ipv4
nsf
mdt source Loopback0
interface all enable
accounting per-prefix
!
vrf 251
address-family ipv4
mdt partitioned mldp ipv4 mp2mp
interface all enable
!
!
router pim
vrf 251
address-family ipv4
rpf topology route-policy mldp-251
rp-address 10.11.1.1
!
!
Partitioned-MDT MP2MP with BGP-AD
vrf 301
address-family ipv4 unicast
import route-target
301:301
!
export route-target
301:301
!
!
!
interface Loopback0
ipv4 address 1.1.1.1 255.255.255.255
!
interface Loopback301
vrf 301
ipv4 address 10.11.51.1 255.255.255.255
!
route-policy mldp-301
set core-tree mldp-partitioned-mp2mp
end-policy
!
router ospf 1
address-family ipv4 unicast
area 0
mpls traffic-eng
interface Loopback0
!
interface Loopback1
!
interface GigabitEthernet0/0/2/0
!
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
160
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software