Cisco ASR 9000 Series Software Manual page 33

Implementing Layer-3 Multicast Routing on Cisco IOS XR Software
• Inter-AS Option A supported. Options B and C not supported.
• All PEs must have a unique BGP Route Distinguisher (RD) value. To configure BGP RD value, refer
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide .
Whenever multicast stream crosses configured threshold on encap PE(Head PE), S-PMSI is announced.
Note
Core tunnel is static P2MP-TE tunnel configured under route-policy for the stream. Static P2MP-TE data
mdt is implemented in such a way that it can work with dynamic data mdt, dynamic default mdtand default
static P2MP.
Profile 17: Rosen-mLDP-P2MP with BGP AD/PIM C-multicast Routing
These are the characteristics of this profile:
• Full mesh of P2MP mLDP core-tree as the Default-MDT, with PIM C-multicast Routing.
• All UMH options supported.
• Default and Data MDT supported.
• Customer traffic can be SM or SSM .
• RPL-Extranet, Hub & Spoke supported.
• Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
• Inter-AS Option A, B and C supported.
Profile 18 : Rosen-Static-P2MP-TE with BGP AD/PIM C-multicast Routing
These are the characteristics of this profile:
• Full mesh of Static-P2MP-TE core-trees, as the Default-MDT, with PIM C-multicast Routing.
• All UMH options supported.
• Default MDT supported; Data MDT is not supported.
• Customer traffic can be SM, SSM .
• RPL-Extranet, Hub & Spoke supported.
• Customer-RP-discovery (Embedded-RP, AutoRP & BSR) is supported.
• Inter-AS Option A supported. Options B and C not supported.
Profile 20 : Rosen-P2MP-TE with BGP AD/PIM C-multicast Routing
These are the characteristics of this profile:
• Dynamic P2MP-TE tunnels setup on demand, with PIM C-multicast Routing
• All UMH options supported.
• Default and Data MDT supported.
• Customer traffic can be SM, SSM .
Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
33