Cisco ASR 9000 Series Software Manual page 152

Configuring Multicast Hub and Spoke Topology: Example
route-policy A2-Spoke-family in ------à leaking the selected spoke routes with hub route targets so they can
be imported by the spoke sites with RPF A2-Hub-3in.
route-policy pass-all out
!
!
!
!
router bgp 1
vrf A2-Hub-3out
rd 4000:4
address-family ipv4 unicast
route-target download
redistribute connected
!
!
!
router bgp 1
vrf A2-Hub-2
rd 4000:2
address-family ipv4 unicast
route-target download
redistribute connected
redistribute eigrp 20 match internal external metric 1000
!
!
!
multicast-routing
vrf A2-Hub-2
address-family ipv4
log-traps
rate-per-route
interface all enable
accounting per-prefix
!
!
!
multicast-routing
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
152
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software