Cisco ASR 9000 Series Software Manual page 126

Configuration Examples for MVPN Profiles
router pim
vrf v161
address-family ipv4
rpf topology route-policy p2mp-te-default
mdt c-multicast-routing bgp
!
address-family ipv6
rpf topology route-policy p2mp-te-default
mdt c-multicast-routing bgp
!
!
route-policy p2mp-te-default
set core-tree p2mp-te-default
end-policy
!
Profile-20: Default MDT - P2MP-TE - BGP-AD - PIM
multicast-routing
mdt source Loopback0
vrf p20_vrf1
address-family ipv4 unicast
import route-target
20:1
!
export route-target
20:1
!
route-policy rpf-for-p20_vrf1
set core-tree p2mp-te-default
end-policy
!
vrf p20_vrf1
rd 20:1
address-family ipv4 unicast
redistribute connected
!
address-family ipv4 mvpn
!
!
rsvp
interface Bundle-Ether1
bandwidth
!
!
vrf p20_vrf1
address-family ipv4
mdt source Loopback0
rate-per-route
interface all enable
accounting per-prefix
bgp auto-discovery p2mp-te
!
mdt default p2mp-te
!
!
vrf p20_vrf1
address-family ipv4
rpf topology route-policy rpf-for-p20_vrf1
rp-address 100.1.20.1 static_p20vrf1_v4
log neighbor changes
interface GigabitEthernet0/0/0/0.202
enable
!
interface GigabitEthernet0/0/0/0.203
enable
!
interface GigabitEthernet0/0/0/1.202
enable
!
interface GigabitEthernet0/0/0/1.203
enable
!
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
126
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software