Cisco ASR 9000 Series Software Manual page 156

Configuring LSM based MLDP: Examples
<all core-facing interfaces>
!
multicast-routing
address-family ipv4
nsf
mdt source Loopback0
interface all enable
accounting per-prefix
!
vrf 1
address-family ipv4
interface all enable
mdt default mldp ipv4 1.1.1.1
accounting per-prefix
!
!
router pim
vrf 1
address-family ipv4
rpf topology route-policy mldp-1
rp-address 10.1.1.1
!
!
Rosen MLDP with BGP Advertisement
vrf 101
vpn id 101:101
address-family ipv4 unicast
import route-target
101:101
!
export route-target
101:101
!
!
!
interface Loopback0
ipv4 address 1.1.1.1 255.255.255.255
!
interface Loopback101
vrf 101
ipv4 address 10.1.101.1 255.255.255.255
!
route-policy mldp-101
set core-tree mldp-default
end-policy
!
router ospf 1
address-family ipv4 unicast
area 0
mpls traffic-eng
interface Loopback0
!
interface Loopback1
!
interface GigabitEthernet0/0/2/0
!
interface GigabitEthernet0/3/2/1
!
interface GigabitEthernet0/3/2/2
!
!
mpls traffic-eng router-id Loopback0
!
router bgp 100 mvpn
address-family ipv4 unicast
redistribute connected
!
address-family vpnv4 unicast
!
Cisco ASR 9000 Series Aggregation Services Router Multicast Configuration Guide, Release 5.1.x
156
Implementing Layer-3 Multicast Routing on Cisco IOS XR Software